Cadet Tech Support Specialists, Steve and Thomas, demonstrate how to clean your electric wall heater. Why you should clean your heater We recommend cleaning your […]
We’ve talked about the difference between baseboard and wall heaters before. Fact of the matter is, in most situations, we’ll recommend you get a wall heater over a baseboard.
They take up less space, use a fan to more quickly spread warm air through your room and are more efficient, which means you’ll save money on your energy bill.
Please take a few minutes to check out our video, which goes over the reasons why you should consider upgrading to a wall heater when replacing a baseboard.
Have you somehow found yourself with a heater that has a built-in thermostat and a wall thermostat? You’re not alone. In this post, Steve from Tech Support shows you what to do to avoid thermostat confusion and keep your room warm.
It’s not going to cost you a stack of 20s, but exactly how much will it cost to run your heater? We can figure out a rough estimate. Just read the blog post to find out how.
Sure, there’s a lot to consider when buying one of our heaters (like wattage, space, look, etc.) but folks often ask us if a baseboard or wall heater is right for their needs.
What do you see when you look at this image? An air filter? Humidifier? Actually, it’s a wall heater. What’s that? This post has your answer.
What is a dual rated heater? It’s a heater that can be hooked up to more than one voltage.
California’s Proposition 65 gives California consumers the right to know when products contain chemicals known by the state of California to cause cancer, birth defects or other reproductive harm. As of August 30, 2018, manufacturers of products sold in California were required to notify consumers when products contain chemicals on the state’s Proposition 65 list.
An electric heater that blows cold air could be caused by several reasons. Check out this blog post for troubleshooting help.
You must use a voltmeter.
Please note: Testing with a voltmeter requires the circuit panel or fuse box to remain on. If you’re unfamiliar or uncomfortable with electrical wiring, please contact a qualified technician or licensed electrician.