
Apex72
Bring warmth to your room without sacrificing living space. Our new Apex72 heater is installed high on your wall, so you’re free to place furniture where you like, and the heater is out of reach for little hands. The quiet fan efficiently spreads the comfort of warm air throughout the entire room.

Above all, more room
- Gain living space - place furniture where you like
- Higher placement is ideal for homes with kids or pets - mount 72 inches above floor
- Contemporary look blends seamlessly into any room
- Cover secured by strong magnets, yet detaches easily for cleaning
- Outlet grill is available in two designs
- Recommended cleaning every 24 months, compared with six months for most wall heaters
- Enjoy lasting warmth, thanks to durable sealed heating element
- Includes high-temperature safety shutoff feature
- Proudly made in the USA
- 5-year warranty
- ETL listed
Need help choosing the right heater for your room?
Click here to find the right voltage.
Narrow by:
Ordering Information
An Apex72 heater assembly, CC model wall can, orient ring, and decorative cover are all required for new installation, and sold separately or as a kit. Choose a decorative cover packaged with an outlet grill in a louvered or hexagonal pattern.
All units require an electronic wall-mounted thermostat. Use ACCA Manual J (residential load calculation) or local codes for determining appropriate heater wattage for your space.
Technical Information
UL safety standards require the heater to be placed a minimum distance of 72 inches from the floor, 6 inches (15.2 cm) from adjacent surfaces, and 10 inches (25.4 .cm) from the ceiling. Maximum distance from bottom of wall can to floor is 90 inches for ceilings 9 feet and higher. For ceilings greater than 9 feet, a ceiling fan with a cooling thermostat is recommended for optimum performance.
Install horizontally only. This heater is not approved for vertical or ceiling installation.
Electric wall heaters and thermostats work best when installed on an inside wall. We recommend installing the heater assembly after walls are finished. Heater must be cleaned every 24 months minimum.
Dimensions
Cover
12”W x 8-1/2”H x 1”D
Rough-In
10”W x 7-7/8”H x 4”D
Wall Can
7-7/8"W x 11-1/2"H x 4"D
Available Downloads | ||||||||
|

Part# 67130
Model# ACH

Part# 67129
Model# ACL

Part# 67061
Model# CC

Part# 67051
Model# OR

Part# 67132
Model# ACH5

Part# 67131
Model# ACL5

Part# 67060
Model# CC10

Part# 67050
Model# OR10

Part# 69111
Model# CCSMW