Energy Plus


Part# : 65204
Product family : Energy Plus

Heater Assembly Only w/Thermostat, Multi-Volt

Need help choosing the right heater for your room? Click here to find the right voltage.

Energy Plus
  • Now with even quieter operation with new motor
  • Use up to 30% less energy with automatically adjusting wattage and fan
  • Easy, safe install – the smart sensor auto adjusts the heater voltage to match your 120, 208 or 240 volt power supply
  • Easily upgrade: uses same wall can as Com-Pak series heaters so no wall patchwork or additional wall board cut outs are required
  • Experience more comfort with precise, consistent temperature control and an auto adjusting fan speed that eliminates wide temperature swings
  • Built-in digital thermostat with simple controls, a large digital display, and no complicated programming
  • Night or Away button allows you to pre-set a secondary, lower temperature for nights or when you’re out of the room
  • Keep the air circulating year-round with the fan-only mode
  • Tamperproof settings let you set minimum and maximum temperature points
  • Proudly made in the USA
  • 5-year warranty
  • ETL listed

Watts at 120V: 1000

Watts at 240V: 1600

Watts at 208V: 1500

Amps at 120V: 8.3

Amps at 240V: 6.7

Amps at 208V: 7.2

Weight: 5.2 lbs

Ordering Information

The Energy Plus fits pre-existing vertically mounted wall cans for the Com-Pak Series heaters and for the following models: C, CB, CM, CS, FX, X. This model cannot be used to replace Com-Pak heaters installed in FW and RB model wall cans.

All heaters include a high performance built-in digital thermostat—a wall thermostat may not be used to control this heater. Temperature range:40˚F to 85˚F.

Available in white only.

Technical Information

UL safety standards require the heater to be placed a minimum distance of 3/4 inches (1.9 cm) from adjacent surfaces and 4-1/2 inches (11.4 cm) from the floor. Cadet recommends a 12-inch clearance from all surfaces for longer and cleaner performance. A 3-foot (91.44 cm) minimum clearance is required for furniture or other objects placed directly in front of the heater.

Install vertically. This heater is not approved for horizontal or ceiling installation.

Electric wall heaters and thermostats work best when installed on an inside wall. We recommend installing the heater assembly after walls are finished. Heater must be cleaned every six months minimum.


8"W x 10-1/8"H x 4"D

Wall Can
7-7/8"W x 11-1/2"H x 4"D

9"W x 12"H x 5/8"D

Available Downloads
Energy Plus Grill Kit
Energy Plus Grill Kit
Part# 65252
Model# CEGW
Com-Pak Wall Can
Com-Pak Wall Can
Part# 67061
Model# CC
18.5 X 22 Inch Metal Adapter Plate (white)
18.5 X 22 Inch Metal Adapter Plate (white)
Part# 67105
Model# CAMW
12 X 21.25 Inch Metal Adapter Plate (white)
12 X 21.25 Inch Metal Adapter Plate (white)
Part# 67115
Model# SAMW
Com-Pak Surface Mount Wall Can (white)
Com-Pak Surface Mount Wall Can (white)
Part# 69111
Model# CCSMW