Have you somehow found yourself with a heater that has a built-in thermostat and a wall thermostat? You’re not alone. In this post, Steve from Tech Support shows you what to do to avoid thermostat confusion and keep your room warm.
Learn how to install a double-pole, built-in thermostat on a Perfectoe electric wall heater by watching the video above.
Learn how to install a single-pole, built-in thermostat on a Perfectoe electric wall heater by watching the video above.
Do you have a Com-Pak Twin heater and want a built-in thermostat with an “off” setting? You’ll need to pick up a CTT2 thermostat and install it on the heater yourself.
Lucky for you, the video above will show you exactly how to do that. (And if you already have a built-in thermostat that you need to remove, we have a video for that too.
We’ve shown you how to remove the built-in thermostat from a Com-Pak wall heater, now we’re going to show you how to do the same thing with a Com-Pak Twin.
Why would you want to do that? Depending on where you live and what store you like to shop at, it can be easier to find a Twin heater with a built-in thermostat than one without one. You can just get rid the thermostat yourself by removing a few screws and cutting one connection on the back of the heater.
If you upgrade, change or move a heater, you might need to repair a hole in your drywall. Fear not, it’s not too complicated of a process if you just follow this guide from Javier from our maintenance department.
While installing an electric baseboard heater or wall heater isn’t exactly rocket science, it requires a bit of know-how. Whether or not you’re up to the task just depends on how comfortable you are working with electricity.
If you’re reading this blog post chances are you’re either one of our loyal followers (thank you very much) or you purchased a Com-Pak, Com-Pak Bath, Com-Pak Max or Energy Plus and are wondering “What the heck do I do with these little foam thingies I found inside the box?”
If you’re in the later group, this blog post should answer all your pressing questions.
Sometimes we get calls from people who want to know if they can wire multiple heaters to one thermostat. The answer to that question is yes, you can wire multiple heaters to one thermostat. But that doesn’t mean we always recommend it.
Did you know some of our Register wall heaters can be wired to output different amounts of heat (or wattage)? Learn how to change the wattage on these multi-watt heaters — models RM162, RM168 and RM151 — in the video above.